![background image](http://html.mh-extra.com/html/ge/avv18/avv18_use-and-care-and-installation-manual_2198859003.webp)
OFF
■
COOL
●
I
HI FAN
●
FAN
Selector Switch
OFF turns
conditioner
NOTE: the air conditioner is
shut off, wait least
minutes
before restarting it.
HI FAN provides high fan speed
operation without cooling.
LO FAN provides low fan speed
operation without cooling.
HI COOL provides cooling with
high fan speed operation.
LO COOL provides cooling with
low fan speed operation.
CLOSED
●
\
●
OPEN
Thermostat Control
When you move the Thermostat
Control to the desired setting,
the thermostat will automatically
control the temperature of the
indoor air. The higher the number
selected, the cooler the indoor air
will become.
Ventilation Control
When you move the Ventilation
Control to CLOSED, the vent door
is closed and only the air inside
the room
be circulated and
conditioned. Moving the control
to OPEN opens the vent door,
allowing a small amount of indoor
air to be exhausted from the room.
However, cooling effectiveness is
reduced when this control is set at
OPEN, so we suggest you don’t
keep it there long+ specially in
hot. humid weather.
For Normal Cooling
1.
Set the Selector Switch at HI
COOL.
2. Set the Thermostat Control at the
desired number (usually the midpoint
is a good starting position). If room
temperature is not satisfactory after
a reasonable time, set the
Thermostat Control at a higher
number for a cooler room or at a
lower number for a warmer room.
3. Set the Ventilation Control
For air circulation and
CLOSED except for brief periods
filtering without cooling
when you want to exhaust room air
to the outside.
Set the Selector Switch at LO FAN
or HI FAN.
For Maximum Cooling
1.
Set the Selector Switch at HI
COOL.
2. Set the Thermostat Control to 8.
3. Set the Ventilation Control at
CLOSED.
For Quieter Operation
For Nighttime Operation
For Extreme Temperatures
1. Set the Selector Switch at the
During the cooler evening hours,
For greatest economy and best
LO COOL position.
we recommend that you set the
performance, we suggest you set
2. Set the Thermostat Control to
Selector Switch at LO COOL
the Selector Switch at HI COOL in
the desired number.
for quieter operation and the
extremely hot weather.
3. Set the Ventilation Control
Thermostat Control at mid-range
(4 or 5). Set the Ventilation
at CLOSED.
Control at CLOSED.
3