49-80520-7
5
Care and cleaning of the vent hood.
Be sure electrical power is off and all surfaces are cool before cleaning or servicing any part of the vent hood.
The hood has 2 metal reusable grease
filters.
The metal filters trap grease released
by foods on the cooktop. They also
help prevent flaming foods on the
cooktop from damaging the inside of
the hood.
For this reason, the filters must
ALWAYS be in place when the hood
is used. The grease filters should be
cleaned once a month, or as needed.
To clean the grease filters, soak
them and then swish them around
in hot water and detergent. Don’t
use ammonia or ammonia products
because they will darken the metal.
Do not use abrasives or oven cleaners.
Light brushing can be used to remove
embedded dirt. Rinse, shake and let
them dry before replacing.
To remove:
Grasp the filter handle and pull it up,
forward and out.
To replace:
Hold the filter at the bottom with
the handle.
Place the top end of the filter
against the inside front of the
hood.
Slide it up until it stops and push
the bottom end back until it snaps
into place.
Reusable Metal Grease Filters
Do not use a steel wool pad; it will
scratch the surface.
To clean the stainless steel surface,
use warm sudsy water or a stainless
steel cleaner or polish. Always wipe the
surface in the direction of the brush
line. Follow the cleaner instructions for
cleaning the stainless steel surface.
&OHDQHUVZLWKR[DOLFDFLGVXFKDV
Bar
Keepers Friend Soft Cleanser™ will
remove surface rust, tarnish, and small
blemishes. To receive a $2.00 coupon
for a trial sample of Bar Keepers
Friend Soft Cleanser™ follow the link
below or scan the QR Code.
www.barkeepersfriend.com/ge
Use only a liquid cleanser free of grit
and rub in the direction of the brush
lines with a damp soft sponge.
To inquire about purchasing stainless
steel appliance cleaner or polish, or to
find the location of a dealer nearest
\RXSOHDVHFDOORXUWROOIUHHQXPEHU
National Parts Center
800.626.2002
GEApplianceParts.com
Stainless Steel Surfaces