49-80520-7
11
REMOVE THE PACKAGING
5HPRYHWKHVPDOOER[KRXVLQJWKHPRWRU
/LIWWKHKRRGRXWRIWKHER[
• Remove shipping screws holding the wood mounting
piece to the back side of the hood. Set aside wood
mounting piece and screws for later installation. Do
not discard.
• Remove the “V” shaped carton insert.
• Remove parts package from the “V” shaped
cardboard insert.
5HPRYHMXQFWLRQER[FRYHUDQGNQRFNRXW
• Install strain relief onto back or top of hood.
• Remove all tape and packing material from the hood,
duct transition and motor.
TOOLS AND MATERIALS REQUIRED
(NOT SUPPLIED)
Pliers
Wire Cutter/
Stripper
Tin Snips
Allen Wrench
Spirit level
Duct tape
Safety glasses
Ladder
Saber saw or Key Hole Saw
Phillips and
Flat blade
screwdrivers
Additional Materials:
• 120V 60Hz, 15 or 20 Amp, 2 wire with ground.
Properly grounded branch circuit.
6WUDLQUHOLHIIRUMXQFWLRQER[
•
µURXQGPHWDOGXFWRUµ[µUHFWDQJXODU
duct length to suit installation.
µSLYRWLQJKH[
socket
Hammer
Electric drill with 1/8” and
3/8” bits
Flashlight
UL Listed Wire nuts
Pencil and tape
measure
Wood
Mounting
Support
Hood
Parts
Package
Shipping Carton
Motor
Installation Instructions