background image

Help us help you...

Before using your air
conditioner, read this book
carefully.

It is intended to help you operate

 maintain your new 

conditioner properly.

Keep it handy 

 answers to your

questions.

 you 

 understand something

or need more help, write (include
your phone number):

Consumer Affairs
GE Appliances
Appliance Park
Louisville, KY 40225

Write down the model and
serial numbers.

You’ll find them on a label behind

the front 

 on the left-hand

side 

 the air discharge duct.

These numbers 

 also on the

Consumer Product Ownership

Registration Card that came with

your air conditioner. Before
sending in this card, please write
these numbers here:

Model Number

Serial Number

Use these numbers in any

correspondence or service 
concerning your air conditioner.

If you received a damaged
air conditioner...

Immediately contact the dealer (or

builder) that sold you the air
conditioner.

Save time and money.
Before you request service...

Check the Problem Solver
section 

 this guide. It lists causes

 minor operating problems that

you can correct yourself.

2

IMPORTANT

SAFETY
INSTRUCTIONS

Read all instructions before
using this appliance.

When using this appliance, always
exercise basic safety precautions,
including the following:

● 

Use this appliance only for its

intended purpose as described
in this Use and Care Guide.

● 

This air conditioner must be

properly installed in accordance
with the Installation Instructions
before it is used. See 
grounding
instructions.

● 

Never unplug your air

conditioner by pulling on the
power cord. 
Always grip plug
firmly and pull straight out from
the receptacle.

● 

Repair or replace immediately

all electric service cords that
have become frayed or otherwise
damaged. 
Do not use a cord that
shows cracks or abrasion damage
along its length or at either the

plug or connector end.

● 

Unplug your air conditioner

before making any repairs.
Note: We strongly recommend
that any servicing be 
by a qualified individual.

 For your safety.. 

 not store

or use combustible materials,
gasoline or other flammable

vapors or liquids in the vicinity of

this or any other appliance.

SAVE 

 you need 

To obtain service, see the
Consumer Services page in the
back   this book.

We’   proud   our service and
want you to be pleased. If 

 some

reason you are not happy with the
service you receive, here are three
steps to 

 for further help.

FIRST, contact the people who
serviced your appliance. Explain
why you are not pleased. In most

cases, this 

 solve the problem.

NEXT, if you are still not pleased,
write all the details—including
your phone number—to:

Manager, Consumer Relations
GE Appliances
Appliance Park
Louisville, KY 40225

 if your problem is still

not resolved, write:

Major Appliance Consumer

Action Panel

 North 

 Drive

Chicago,   60606

Summary of Contents for AMD08

















Reviews: