508296-G01 / 31-5000753
Page 1 of 24
Issue 2231
GE Appliances
A Haier Company
Appliance Park
Louisville, KY 40225
(P) 508296G01
*P508296G01*
Table of Contents
General ........................................................................2
Installation ...................................................................2
Refrigerant Piping ........................................................4
Electrical - Circuit Sizing and Wire Routing ...............14
Thermostat Control and Low Voltage Control Wiring 14
Outdoor Unitary Control.............................................18
Unit Operation ...........................................................19
Start-Up .....................................................................19
Homeowner Information ............................................21
Professional Maintenance .........................................22
Start-Up and Performance Checklist .........................24
Installation and servicing of air conditioning equipment
can be hazardous due to internal refrigerant pressure
and live electrical components. Only trained and
qualified service personnel should install or service
this equipment. Installation and service performed by
unqualified persons can result in property damage,
personal injury, or death.
WARNING
Sharp metal edges can cause injury. When installing
the unit, use care to avoid sharp edges.
WARNING
The Clean Air Act of 1990 bans the intentional venting
of refrigerant (CFCs, HCFCs and HFCs) as of July
1, 1992. Approved methods of recovery, recycling or
reclaiming must be followed. Fines and/or incarceration
may be levied for noncompliance.
IMPORTANT
This manual must be left with the homeowner for future reference.
This is a safety alert symbol and should never be ignored. When you see this symbol on labels or in manuals, be alert to
the potential for personal injury or death.
INSTALLATION INSTRUCTIONS
NS23AMA
Variable Capacity Air Conditioner
To prevent serious injury or death:
1. Lock-out/tag-out before performing maintenance.
2. If system power is required (e.g., smoke detector
maintenance), disable power to blower, remove
fan belt where applicable, and ensure all
controllers and thermostats are set to the “OFF”
position before performing maintenance.
3. Always keep hands, hair, clothing, jewelry, tools,
etc. away from moving parts.damage, personal
injury, or death.
WARNING
