background image

Care and Cleating

USER MAINTENANCE
INSTRUCTIONS

Turn 

 conditioner off and

remove the plug from the wall
outlet before cleaning.

   Cabinet

Wipe 

 grille with   clean cloth

lightly dampened with mild 

 detergent. Wash

cabinet with mild 

 or detergent

 lukewarm water.

Outdoor Coil

This 

   the outdoor side 

 the

unit 

 be checked periodically

 cleaned   

 with dirt or

soot from the atmosphere. 
extremely soiled, it 

 need to be

steam cleaned,   service available
through 

 GE service outlet.

Front Grille

Remove the 

 

   the

window sill prevents removal 
the 

 

 or   

 need to read

the model 

 

 numbers.

To remove the grille:

Step 1: Remove 

 

 the screw

 holds the grille to the chassis.

Step 

2: 

Press inward on the lower

right side 

 the cabinet until the

 is 

   the slot 

 

 the

grille to 

 

 you slightly.

Step 

3: 

 this process 

 the

lower 

 side.

 

 

 

 

 

 

 

 

   inches

 

   

 

 2 

 

 

 

 

Step 4: Grasp the grille’s lower
right 

 left corner 

 carefully

lift straight upward to disengage the

 

 

 their slots in the

cabinet front edge.

To attach the grille:

The grille is attached 

 

   the

cabinet by four tabs 

   screw.

Step 1: Set the 

 direction louvers

upward.

Step 

2: 

Grasp the grille’s upper

right 

 

 corner 

 carefully

insert the VENT knob between the
lower 

 direction 

 and the

grille 

 

 

 two tabs

 the grille’s top inside edge with

two slots in the cabinet 

 edge.

Air Direction Louvers

Grille Frame “

FRONT VIEW

SIDE VIEW

Step 3: Press 

 on the lower

right side of the metal cabinet at
the location 

 the slot and then

carefully push the grille in until the
tab engages with the slot.

Step 4: Repeat this process 

 the

lower left side.

Step 5: Mount the grille 

 front

 the cabinet with the screw

attached to 

 during shipping,

and   

 the filter back into place.

6

Air Filter

The air filter behind the inlet 
should be washed   least every 

30

days 

   often   it 

needs cleaning.

To remove the filter, grasp the tab

 the filter and 

 downward. If

the window 

 

 access to the

air filter, you must first 

 the

front grille.

Vacuum the 

 

 the dusty side

to remove light dust. 

 the

filter, cleaner side up, 

 gently

flowing water to wash out
accumulated dust and lint.   the

filter is very dirty, use   mild
household detergent in the wash
water. Let the 

 dry thoroughly

 replacing it.

When replacing the filter,  be sure
the word FRONT is facing you as
you slide the filter back into place.

Summary of Contents for AMD08

















Reviews: