![background image](http://html1.mh-extra.com/html/ge/af-600-fp-series/af-600-fp-series_operating-instructions-manual_3924393080.webp)
Function Set-ups parameters
The Quick Menu parameters are grouped in the following way:
Application Settings
Fan Macros
Pump Macros
Compressor Macros
AP-60 Broken Belt Function
AP-20 Low Power Auto Set-up
H-43 Torque Characteristics
AP-61 Broken Belt Torque
AP-21 Low Power Detection
F-24 Holding Time
AP-62 Broken Belt Delay
AP-22 Low Speed Detection
AP-75 Short Cycle Protection
C-40 Semi-Auto Jump Freq Set-up
AP-23 No-Flow Function
AP-76 Interval between Starts
H-43 Torque Characteristics
AP-24 No-Flow Delay
AP-77 Minimum Run Time
AP-22 Low Speed Detection
AP-40 Minimum Run Time
E-51 Terminal 27 Mode
AP-23 No-Flow Function
AP-41 Minimum Sleep Time
E-52 Terminal 29 Mode
AP-24 No-Flow Delay
AP-42 Wake-up Speed [RPM]
E-03 Terminal 27 Digital Input
AP-40 Minimum Run Time
AP-43 Wake-up Speed [Hz]
E-04 Terminal 29 Digital Input
AP-41 Minimum Sleep Time
AP-44 Wake-up Ref./FB Difference
E-24 Function Relay
AP-42 Wake-up Speed [RPM]
AP-45 Setpoint Boost
H-09 Start Mode
AP-43 Wake-up Speed [Hz]
AP-46 Maximum Boost Time
H-36 Trip Speed Low [RPM]
AP-44 Wake-up Ref./FB Difference
AP-26 Dry Pump Function
H-37 Trip Speed Low [Hz]
AP-45 Setpoint Boost
AP-27 Dry Pump Delay
AP-46 Maximum Boost Time
AP-80 Flow Compensation
B-10 Brake Function
AP-81 Square-linear Curve Approximation
B-16 AC brake Max. Current
AP-82 Work Point Calculation
B-17 Over-voltage Control
AP-83 Speed at No-Flow [RPM]
H-09 Start Mode
AP-84 Speed at No-Flow [Hz]
F-24 Holding Time
AP-85 Speed at Design Point [RPM]
H-80 Function at Stop
AP-86 Speed at Design Point [Hz]
B-00 DC Hold Current
AP-87 Pressure at No-Flow Speed
H-08 Reverse Lock
AP-88 Pressure at Rated Speed
AP-89 Flow at Design Point
AP-90 Flow at Rated Speed
H-43 Torque Characteristics
H-09 Start Mode
How to Program
AF-600 FP High Power Operating Instructions
79
6
6