background image

NOTE:

 Appearance will vary by model.

Assembly Instructions

Advantium

®

 240V Built-In Accessory Storage Drawer

JX2200, JX2201, ZX2201

BEFORE YOU BEGIN

 

Read these instructions completely and carefully. Read 

the Installation Instructions for the Advantium 240V oven 

completely and carefully for cutout dimensions and  

step-by-step instructions.

IMPORTANT

³

 

 

Save these instructions for 

local inspector’s use. 

IMPORTANT

³

 

 

Observe all governing codes 

and ordinances.

‡

NOTE TO INSTALLER:

 

Be sure to leave these  

instructions with the Consumer.

‡

NOTE TO CONSUMER:

 

Keep these instructions 

with your Advantium 240V Oven Owner’s Manual for 

future reference.

‡

SKILL LEVEL:

 

Installation of this appliance requires 

basic mechanical skills.

‡

COMPLETION TIME: 

One hour with the installation 

of an Advantium 240V oven.

‡

Proper installation is the responsibility of the installer.

‡

Product failure due to improper installation is not  

covered under the Warranty. See the Advantium 

240V Oven Owner’s Manual for warranty information.

TOOLS REQUIRED

 

‡ 3KLOOLSVVFUHZGULYHU

PARTS SUPPLIED

‡ 6LGH6XSSRUWV
‡ 6FUHZV
‡ 6FUHZVFRORUPDWFKHG

MODELS AVAILABLE

 

Models:

 

JX2200BB–Black 
JX2201SS–Stainless Steel

Monogram Models:

ZX2201SS–Stainless Steel

NOTE:

 

Advantium 240V Built-In SpeedCook Oven 

model ZSC2202SS CANNOT be installed with an  

accessory storage drawer.

 See Installation 

Preparation Without an Accessory Storage Drawer 

in the Advantium 240V Built-In SpeedCook Oven 

Installation Instructions for this model.

PRODUCT DIMENSIONS AND CLEARANCES

 

Allow 15” clearance  

when fully open

5”

13

Summary of Contents for Advantium ZSC2201JSS

















Reviews: