16
Remove circuit breaker box bottom plate prior to positioning
generator. Two 60” lengths of 2” Schedule 40 pipe (
A
),
supplied by the installer, are required to lift the generator
onto cement pad. Insert pipes through the lifting holes (
B
)
located near the unit’s base.
Use a spreader bar to ensure that the chains, straps or
cables DO NOT touch the generator’s roof. Retouch any
chipped paint with supplied touch-up paint.
Lifting the Generator
The generator weighs approximately 2,120 pounds (962 kg).
Proper tools, equipment and qualified personnel should be
used in all phases of handling and moving the generator.
A
B
WARNING
Hazardous Voltage - Contact with power lines could
cause electric shock or burn, resulting in death or
serious injury.
Lifting Hazard / Heavy Object - Could result in
serious injury.
• If lifting or hoisting equipment is used, DO NOT contact any
power lines.
• DO NOT lift or move generator without assistance.
• Use lifting pipes as described in
Lifting the Generator
.
• DO NOT lift unit by roof as damage to generator will occur.
A
B
NOT
for
REPRODUCTION
Summary of Contents for 60000 Series
