GE 5448623 Basic Service Manual Download Page 259

Page: 259 / 289

System maintenance

Venue 50 – Basic Service Manual

10-11

5447566-100 English Rev. 7

System maintenance

Preliminary checks

The preliminary checks take about 15 minutes to perform. Refer
to the Ultrasound system user documentation whenever
necessary.

Table 10-5: System preliminary checks

Step

Item

Description

Ask and Listen

Ask the customer if they have any problems or questions about the
equipment.

Paperwork

Fill in the top of Ultrasound Inspection Certificate (see

Figure 10-6

page 10-34

). Record all probes and Ultrasound system options.

Power up

• Turn the Ultrasound system power on and verify that all fans and

peripherals turn on.

• Watch the displays during power up to verify that no warning or error

messages are displayed.

• Where applicable, confirm that the battery is charged. If no AC Input

present, use the internal battery.

Probes

Verify that the Ultrasound system properly recognizes all probes.

Displays

Verify proper display on the monitor.

Summary of Contents for 5448623

































































































































































































































































































Search results

Summary of Contents for 5448623

Reviews:

Related manuals for 5448623

Brands by name

Popular brands

GE 5448623, Basic Service Manual

Search results

Summary of Contents for 5448623

Reviews:

Related manuals for 5448623

Brands by name

Popular brands