GE 5448623 Basic Service Manual Download Page 125

Page: 125 / 289

System Configuration

Venue 50 – Basic Service Manual

3-53

5447566-100 English Rev. 7

Power Module Rating Plate/Warning Lable

1. Rating Plate/Warning Label Explanations

2. If the lock button moves to the unlock position while the

Venue 50 is in use, the Power Module needs to be
re-mounted.

For the explanation of other labels/Icons on Rating Plate/Label,
please refer to the latest revision of Venue 50 Basic User
Manual.

NOTE:

Please refer to the operation manual of each peripheral for
information needed by the user to operate the system safely.

Table 3-16: Label/Icon Explanations

Label/Icon

Explanations

The power is supplied by the
Alternating Current (AC)

The power is supplied by the battery
when the Alternating Current (AC) is
off.

Summary of Contents for 5448623

































































































































































































































































































Search results

Summary of Contents for 5448623

Reviews:

Related manuals for 5448623

Brands by name

Popular brands

GE 5448623, Basic Service Manual

Search results

Summary of Contents for 5448623

Reviews:

Related manuals for 5448623

Brands by name

Popular brands