GE 37 400, Technical Reference And Operating Manual

Page: 230 / 306

6 Documentation Videos
6-18 Issue 2 (12/2013) USM 36
You will then automatically switch to the first operating
level with the A-scan.
Next to the A-scan, the control functions are displayed
in the function group
RECORD , whereas the settings for
each gate in question are displayed in the function
groups of gates.
Recording information is displayed on top of the A-scan:
● TIME = current time of recording,
● FRAM = number of single frames.
– In the function group RECORD , select the function
RECORD and press one of the two selector keys to
start the recording.
– Switch to the function FLAG and press one of the two
selector keys to set a flag. The name of the flag cor-
responds to the number of the single frame when the
function key is pressed.
– Switch to one of the function groups of gates and op-
erate the gates as usual.
– Vary the gain as usual.
– In the function group RECORD , select the function
RECORD and press one of the two selector keys to
interrupt the recording.
– In the function group RECORD , select the function
STOP and press one of the two selector keys. The re-
cording is stopped, and you will see the normal dis-
play view of the first operating level with the A-scan
and the function groups.