VMWI / Visual Ringer Indicator on Handset
IMPORTANT: In order to use this unit’s Voice Mail Waiting
Indicator (VMWI) feature, you must subscribe to this service
from your phone company.
The VMWI indicator on the top of the handset flashes when you
receive a new message from your service provider. Also, it serves as a
Visual Ringer function. It will flash when there is an incoming call.
Speakerphone Operation
NOTE: If you are using the speakerphone, remain close to
handset so the party you are speaking to can hear you.
If you are using the earpiece and want to switch to the
speakerphone, press the
TALK/SPEAKER
button, press
END
button to
end conversation.
If you are using the speakerphone and want to switch to the
earpiece, press the
TALK/SPEAKER
button again, press
END
button
again to end conversation.
Making a Call
1. Press the
TALK/SPEAKER
button. Dial the desired number.
- OR -
Dial the number first, then press the
TALK/SPEAKER
button.
- OR -
Press the
caller ID-volume
(
5
or
6
) button to select the desired
record, then press the
TALK/SPEAKER
button.
. When finished, press the
END
button to hang up.
NOTE: You may enter up to 28 pre-dial digits.
NOTE: If you want to delete the pre-dial number you
entered, press the delete/int/conf button until all of the
digits are erased.
