Answering Calls
1. When the phone rings, pick up the handset and press the
TALK/
SPEAKER
button.
. When finished, press
END
button to hang up.
- OR -
If the auto talk mode is selected, pick up the handset from the
charge cradle to answer the call immediately.
NOTE: Adjust the handset volume by pressing the
caller ID-volume (
5
or
6
) button during a call.
Call Timer
After you press the
TALK/SPEAKER
button on the handset, the built-in
call timer shows on the display and counts the length of time of the
call in minutes and seconds.
Auto Standby
If you place the handset in the cradle while the handset is off the
hook (during a call), the call is automatically disconnected.
Ringer Volume (Shortcut)
There are two ways to set the ringer volume. One is the traditional
way as described in the Programming Functions; Sound Setup; Ringer
Volume menus. The other one is this short cut to ringer menu.
1. Make sure the phone is
OFF
(not in TALK mode).
. Press the
#pause/ringer
button to display
SET RINGER LEVEL 5
.
. Use the
caller ID-volume
(
5
or
6
) button to scroll to your
selection.
LEVEL 5
is the default setting.
. Press
#pause/ringer
button again to save and display the new
selection for a few seconds.
