background image

2  Rights of the Telephone Company 

Should your equipment cause trouble on your line which may harm the telephone 

network, the telephone company shall, where practicable, notify you that temporary 

discontinuance of service may be required. Where prior notice is not practicable and 

the circumstances warrant such action, the telephone company may temporarily 

discontinue service immediately. In case of such temporary discontinuance, the 

telephone company must: (1) promptly notify you of such temporary discontinuance; 

() afford you the opportunity to correct the situation; and () inform you of your right to 

bring a complaint to the Commission pursuant to procedures set forth in Subpart E of 

Part 68, FCC Rules and Regulations.
The telephone company may make changes in its communications facilities, 

equipment, operations or procedures where such action is required in the operation 

of its business and not inconsistent with FCC Rules and Regulations. If these changes 

are expected to affect the use or performance of your telephone equipment, the 

telephone company must give you adequate notice, in writing, to allow you to maintain 

uninterrupted service.

Interference Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the following 

two conditions: (1) This device may not cause harmful interference; and () This 

device must accept any interference received, including interference that may cause 

undesired operation.
This equipment has been tested and found to comply with the limits for a Class B 

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to 

provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not 

installed and used in accordance with the instructions, may cause harmful interference 

to radio communications. However, there is no guarantee that interference will not 

occur in a particular installation.
Privacy of Communications may not be ensured when using this product.
If this equipment does cause harmful interference to radio or television reception, 

which can be determined by turning the equipment off and on, the user is encouraged 

to try to correct the interference by one or more of the following measures:

•  Reorient or relocate the receiving antenna (that is, the antenna for radio or 

television that is “receiving” the interference).

Summary of Contents for 28223EE1





































































Reviews: