GE 28129 Series User Manual Download

Page: 32 / 68

ANSWEriNG SYSTEM oPErATioN

Answerer on/off

There are several ways to activate/deactivate the answerer; press the ANSWERER

ON/OFF button on the base, use the “Answerer” menu on the base, or use the

“Remote Access” from the handset or another phone (refer to respective sections for

more information.

Mailbox indicator

There are indicator lights under each mailbox buttons (PLAY STOP 1/ PLAY STOP /

PLAY STOP 3), which inform you of whether the messages for each individual mailbox

are new or old.

•  Mailbox button/indicator is on -- there are stored messages.
•  Mailbox button/indicator is off -- no messages in that mailbox.
•  Mailbox button/indicator is flashing – there are new messages.

Leaving a Message

1. After the answerer answers the incoming call and plays the outgoing

announcement, the caller can enter the mailbox number (1, or 3) while the

announcement is playing or within the seconds after the end of announcement

and then leave a message in that specific mailbox.

. If there is no entry of mailbox number during that period, then your message will

be left in the default mailbox 1.

Screening Calls from the Base

1. When the answering system answers the call, listen while the caller leaves a

message (to determine who is calling).

. To speak to the caller, pick up the handset and press the TALK or SPKR button or

press the SPEAKER button on the base.

The answering system automatically stops recording when you activate the handset

or pick up an extension phone.

TiP: Make sure the volume on the base is set loud enough to hear

your incoming calls.

Memory full

When the answering system memory is full, the system answers after 10 rings. You

should erase some messages so the answering system may record new messages.

Summary of Contents for 28129 Series





































































Search results

Summary of Contents for 28129 Series

Reviews:

Related manuals for 28129 Series

Brands by name

Popular brands

GE 28129 Series, User Manual

Search results

Summary of Contents for 28129 Series

Reviews:

Related manuals for 28129 Series

Brands by name

Popular brands