manualshive.com logo in svg

GE 28129 Series, User Manual, Page: 23 / 68

Share
Download
GE 28129 Series User Manual Download Page 23

3

ringer Tone

You may choose from the 5 preset melodies and 10 dual-tone ringer tones.

NoTE: You may download an additional 5 MiDi ring tones with the 

PC software. 

from the 

Sound Settings

 menu:

1.   Use the 

 or 

 button to scroll to 

Ringer Tone

.

.  Press the Select (SKL) button to enter the menu.
3.   Use the 

 or 

 button to scroll to the desired melody ringer tone. The default is 

Melody 1

. 

4.   Press the Select (SKL) button to save your selection. You will hear a confirmation 

tone.

ringer volume

You may choose ringer setting from this menu.

from the 

Sound Settings

 menu:

1.   Use the 

 or 

 button to scroll to 

Ringer Volume

.

.  Press the Select (SKL) button to enter the menu.
3.   Use the 

 or 

 button to scroll to the desired ringer volume.  

The default is 

Level 5

. 

4.   Press the Select (SKL) button to save your selection. You will hear a  

confirmation tone.

NoTE: if you turn the ringer 

OFF

, 

RINGER OFF

 shows on the display

.

Key Tone

This feature allows you to set the key tone volume.

from the 

Sound Settings

 menu:

1.   Use the 

 or 

 button to scroll to 

Key tone

.

.  Press the Select (SKL) button to enter the menu.
3.   Use the 

 or 

 button to scroll to the desired key tone volume.  

The default is 

Level 3.

 

4.   Press the Select (SKL) button to save your selection. You will hear a  

confirmation tone.

Summary of Contents for 28129 Series





































































Reviews:

No comments