GE 28129 Series User Manual Download

Page: 51 / 68

6. Press the Select (SKL) button and use the

button to select desired

location. (Up to 10 locations, 0 to 9)

7. Press Select (SKL) button to confirm.

Editing the Speed Dialing Number

1. Make sure your phone is

off

(not in talk mode).

. Press the

button to shortcut to phone book menu.

3. Press Option (SKL) button to access the option menu.
4. Use the

button to scroll to

Speed Dialing

5. Press the Select (SKL) button and use the

button to select desired

location.

6. Press the Option (SKL) button to access the option menu.
7. Use the

button to scroll to

Edit Number

8. Press Select (SKL) button. Phone book records show on display.
9. Use the

button to scroll to desired record.

10. Press Select (SKL) button to confirm the selection.

Deleting the Speed Dialing Number

1. Follow steps 1 to 6 in section “Editing the Speed Dialing Number”.
. Use the

button to scroll to

Delete Number

3. Press the Select (SKL) button,

DELETE?

shows on the display.

4 Press the Yes (SKL) button to confirm the selection.

DELETED

shows on the display.

Transferring the Phone book record between

handset(s) and base

1. Make sure your phone is

off

(not in talk mode).

. Press the

button to shortcut to phone book menu.

3. Use the

button to scroll to desired record.

4. Press Option (SKL) button to access the option menu.
5. Use the

button to scroll to

Transfer Record

6. Press Select (SKL) button and the list of registered handsets and base shows on

display.

7. Use the

button to scroll to desired handset or base.

8. Press Select (SKL) button to confirm the selection. After the transfer process finish,

Successful

shows on the display.

Summary of Contents for 28129 Series





































































Search results

Summary of Contents for 28129 Series

Reviews:

Related manuals for 28129 Series

Brands by name

Popular brands

GE 28129 Series, User Manual

Search results

Summary of Contents for 28129 Series

Reviews:

Related manuals for 28129 Series

Brands by name

Popular brands