De-Registration
De-registration cancels registration. During the de-registration process, keep
the handset near the base.
From the Handset Setup Menu:
1. Press the caller ID-volume (
6
or
5
) button to scroll to the
DEREGISTRATION
sub-
menu.
2. Press the mute/program button to enter the menu.
DEREGISTRATION 1YES
4
2NO - - -
shows in the display The default setting is "
2NO
".
3. Use the touch-tone pad to select 1 for
YES
or 2 for
NO
. Or use the caller ID-
volume (
6
or
5
) button to scroll to
1YES
or
2NO
.
WARNING: It is not recommended that a handset be de-registered
unless absolutely necessary because once a handset is de-
registered, that handset’s telephone features cannot be used until
the handset is re-registered.
4. Select
NO
, if you do not want to de-register.
5. If you select
1YES
, press the mute/program button and
MOVE NEAR TO BASE
displays for 2 seconds, then
CONFIRM? 1YES 2NO
appears in the display.
6. Press the touch-tone pad to select 1 for
YES
or 2 for
NO
, or use the caller ID-
volume (
6
or
5
) button to scroll to
1YES
or
2NO
.
7. If you select
YES
, press the mute/program button to confirm.
DE-REGISTER...
shows in the display. You will hear a confirmation tone. Then
HANDSET X
DEREGISTERED
shows in the display to confirm the handset is deregistered.
NOTE: When you complete the de-registration process,
HANDSET
NEEDS REGISTRATION
shows in the display. To use the handset,
you MUST re-register the handset using the Registration process.
Global De-registration
If one or more handsets becomes lost, you should de-register all handsets to
ensure proper system operation. Follow the steps below to de-register all handsets
at the same time.
WARNING: It is not recommended that a handset be de-registered
unless absolutely necessary because once a handset is de-
registered, that handset’s telephone features cannot be used until
the handset is re-registered.
1. Disconnect power from the base by pulling the plug out of the back of the unit.
2. Press and hold the page button and while holding the page button reconnect
the power.
3. Continue to hold the page button until the charge/in use light flashes rapidly.
4. Release the page button.
5.. Press and release the page button on the base once. All handsets are de-
registered and
HANDSET NEEDS REGISTRATION
shows in the display.
Intercom Operation
(applicable only with additional handsets)
The intercom feature allows you to have a conversation with another
registered handset without tying up the telephone line, allowing you to still
receive incoming calls.
Making an Intercom Call
1. Make sure the handset is
OFF
(not in talk mode).
2. Press the int button on the handset.
3. Use the touch-tone pad to select the handset you want to page.
NOTE: To cancel page, press the int button again or the *TONE/exit
button on the sending handset.
4. Wait for the person at the receiving handset to press the int button.
NOTE: If the receiving handset does not answer within two minutes,
the intercom call is automatically canceled. The originating handset
displays
NO ANSWER
.
5. When finished, press the *TONE/exit button or int button on either handset to
deactivate the intercom.
NOTE: The system is expandable up to 4 handsets (by purchase
of optional Model 28110 handset with recharge cradle). When 4
handsets are registered, the system can handle 2 separate intercom
operations at once, for example, 1st handset intercoms with 2nd
handset while 3rd handset intercoms with 4th handset.
Receiving an Intercom Call
When you receive an intercom call, your handset beeps. To answer the call press
the int button or TALK/CALL BACK button.
Advanced Intercom Features
Receiving an Incoming Call During an
Intercom Call
If you receive a telephone call during an intercom call, the intercom call is
immediately terminated and both handsets ring. Either handset user may press the
TALK/CALL BACK button to answer the call.
Using Intercom with External Telephone Calls
During a telephone call, you may use the intercom/paging function to page
another handset and have an off line, private (two-way) intercom conversation.
You may also have a three-way conversation between the external caller and the
handsets, or you may transfer the external telephone call to another handset.
NOTE: Before you intercom/page another handset, you must decide
whether you want to create a two-way or a three-way conversation.
Two-Way Calling
1. During an external call, press the int button, and use the touch-tone pad to enter
the handset number you want to call.
NOTE: The receiving handset presses the int button to answer
the intercom call. Both intercom users may speak privately. The
external caller will not hear the intercom conversation.
2. When finished, press the *TONE/exit button or int button to end the intercom
call, return to the talk mode, and resume your original telephone conversation.
Three-Way Calling
1. During an external call, press the int button.
LINE ON HOLD EXTENSION?
shows
in the display.
2. Use the touch-tone pad to select Handset #. You will hear a paging tone and
PAGING
shows in the originating handset’s display.
NOTE:
PAGING FROM...
shows in the display on the receiving
handset, and the receiving handset presses the int or TALK/
CALL BACK button to answer the intercom.
3. When the receiving handset connects, press the conf/format button on
the originating handset to conference with the receiving handset and the
external caller.
CONFERENCE
shows in the display on the originating and
receiving handsets.
NOTE: A handset can enter conference mode directly by pressing
TALK/CALL BACK on the second handset during a call.
Transferring External Calls to Other Handsets
During an external call, you may transfer the external call to another handset.
1. Press the int button on the originating handset to put an external call on hold,
and then page the receiving handset.
2. Use the touch-tone pad on the handset to select Handset #. You will hear a
paging tone.
PAGING
shows on the originating handset’s display, and
PAGING
FROM...
shows on the receiving handset’s display.
3. When the receiving handset connects, press the TALK/CALL BACK button on the
originating handset to transfer the call.
-OR-
4. Press the TALK/CALL BACK button on the originating handset to transfer the
call. If the receiving handset does not answer within 30 seconds, the originating
handset rings back and displays
CALLBACK
. If the originating handset does not
answer within 20 seconds, the call is automatically dropped.
Service
Thomson Digital Technologies Ltd., warrants to the purchaser or gift recipient that if any
manufacturing defect becomes apparent in this product within 1 year from the original
date of purchase, it will be replaced free of charge, including return transportation.
This warranty does not include damage to the product resulting from accidents, misuse
or leaking batteries.
Should your product not perform properly during the warranty period, either:
1. Return it to the selling dealer with proof of purchase for replacement,
OR
2. Remove the batteries (where applicable), and pack product complete with
accessories in the original carton (or equivalent).
— Mail prepaid (with proof of purchase) and insured to:
Thomson Digital Technologies Ltd.
6200 Edwards Boulevard
Mississauga, Ontario
Canada L5T 2V7
The provisions of this written warranty are in addition to and not a modification of or
subtraction from the statutory warranties and other rights and remedies contained
in any applicable legislation, and to the extent that any such provisions purport to
disclaim, exclude or limit any such statutory warranties and other rights and remedies,
such provisions shall be deemed to be amended to the extent necessary to comply
therewith.
If you are unable to find a qualified servicer for out of warranty service, you may write
to:
Thomson Digital Technologies Ltd.
c/o Thomson Inc.
P.O. Box 0944
Indianapolis, Indiana, U.S.A., 46206-0944
Attach your sales receipt to this booklet for future reference. This information is required
if service is needed during the warranty period.
PURCHASE DATE ______________________________________________________
NAME OF STORE ______________________________________________________
