BK-T1 Quick Operation Guide
1.
Package and Accessory /
Notes: 1. Headset Fixture is with cables to connect to speakers (Red connector),the microphone (Yellow
connector) and a two-way radio separately (Black Connector).
2. Only one microphone is included in the package and depending on the helmet type,you can choose
either to have Microphone for Full Face Helmet or Microphone for 3/4 Face Helmet.
2.Installation /
Install the speakers
2.1 Headset Fixture Installation with the Adhesive Pad or the Spring Clip.
2.1.1 Install with Adhesive Pads
Remove the cover of adhesive pads at the back of the headset fixture and fix them to the helmet.
Note: Clean the area with the cleaning pad before applying the adhesive pads.
2.1.2 Install with the Spring Clip
1. Insert the spring clip from the lower edge by pushing it into the slot. The spring clip CANNOT be
removed after fixed. Please make sure of the direction before applying.
2. Mount the fixture to the helmet by pulling open the spring clip to attach it to the helmet.
