GE 27918 User Manual Download Page 64

Page: 64 / 94

h) Message counter has “LA” - The answering system is

being accessed remotely.

i) Message counter has “En“ on the display - English is

selected as the current voice prompt during language

selection.

j) Message counter has “Fr“ on the display - French is

selected as the current voice prompt during language

selection.

k) Message counter has “SP“ on the display - Spanish is

selected as the current voice prompt during language

selection.

NOTE: While the messages are playing, the

message counter will display the messages in

the order they were received.
NOTE: The maximum recording time for each

message is 3 minutes and the total recording

time of this unit is 12 minutes.

Leaving a Message/Memo

Use the memo feature to leave a message.
1. Press and hold the memo button.
. Begin speaking after you hear “

RECORD MESSAGE

” and

start tone.

Summary of Contents for 27918































































































Search results

Summary of Contents for 27918

Reviews:

Related manuals for 27918

Brands by name

Popular brands

GE 27918, User Manual

Search results

Summary of Contents for 27918

Reviews:

Related manuals for 27918

Brands by name

Popular brands