Jabra Elite Active 65t - Copper Blue
How do I pair my Jabra earbuds with my mobile device?
To pair with your mobile device for the first time, follow these steps.
1. Turn on the Bluetooth setting on your mobile device.
2. When you unpack your Jabra earbuds from the box, turn them on by
pressing and holding the
Multi-function
button on the right earbud (1
second) until the LED flashes green.
The earbuds enter pairing mode automatically.
3. Go to the Bluetooth menu on your mobile device and select the Jabra
earbuds to complete the pairing. Alternatively, wear the earbuds to
hear the voice guided instructions.
Enter “0000” (four zeros) if you are asked for a PIN.
If pairing is successful, your earbuds will appear in the list of connected
Bluetooth devices on your mobile device. The Bluetooth connection will
also be announced in the earbuds.
To re-pair with your mobile device or pair with an additional mobile
device, follow these steps.
1. Turn on the Bluetooth setting on your mobile device.
2. Start with the right earbud turned off and in your hand (not in the
charging case). To turn off the right earbud, press and hold (5 seconds)
the
Multi-function
button, until the LED flashes red.
3. To enter pairing mode, press and hold (5 seconds) the
Multi-function
button until the LED flashes blue.
4. To pair, go to the Bluetooth menu on your mobile device and select the
Jabra product from the list. Alternatively, wear the earbuds to hear the
Enter “0000” (four zeros) if you are asked for a PIN.
When you take the left earbud out of the charging case, it will connect
28/06/2021 15:41
https://www.jabra.hk/supportpages/jabra-elite-active-65t/100-99010000-
40/faq/e09ec7d7-ae74-47a3-902f-a8270548f526
Page 1 of 2
