GE 27918 User Manual Download Page 75

Page: 75 / 94

LOW BATTERY

Indicates the battery needs to be

charged.

NEW VOICE MAIL

Indicates voice mail has not been

retrieved from service provider.

CALL SCREENING

Indicates you may use the handset

to screen calls before answering the

call.

MSG WAITING OFF

Indicates voice mail has been

retrieved from service provider.

NEW CALL XX

XX represents the number of new

CID records not reviewed.

NO CALLS

Indicates there are no CID records in

memory.

NO USER MEMORY

Indicates the memory location

contains no user memories and

the user is trying to mark a specific

user record for VIP MELODY.

OUT OF RANGE

May indicate handset is too far away

from the base or that the power has

been interrupted. Move closer and

check connections.

PAGING or

Someone pressed the page button

PAGING FROM

on the base or int button on the

handset.

Summary of Contents for 27918































































































Search results

Summary of Contents for 27918

Reviews:

Related manuals for 27918

Brands by name

Popular brands

GE 27918, User Manual

Search results

Summary of Contents for 27918

Reviews:

Related manuals for 27918

Brands by name

Popular brands