GE 27918 User Manual Download Page 50

Page: 50 / 94

. When finished, press the exit button or int button to end

the intercom call, return to the talk mode, and resume

your original telephone conversation.

Three-Way Calling

1. During an external call, press the int button.

LINE ON

HOLD EXTENSION?

shows in the display.

. Use the touch-tone pad to select Handset #. You will

hear a paging tone and

PAGING

shows in the originating

handset’s display.

NOTE:

PAGING FROM...

shows in the display

on the receiving handset, and the receiving

handset presses the int or TALK/CALL BACK

button to answer the intercom.

. When the receiving handset connects, press the format/

conf button on the originating handset to conference

with the receiving handset and the external caller.

CONFERENCE

shows in the display on the originating and

receiving handsets.

NOTE: A handset can enter conference mode

directly by pressing TALK/CALL BACK on the

second handset during a call.

Summary of Contents for 27918































































































Search results

Summary of Contents for 27918

Reviews:

Related manuals for 27918

Brands by name

Popular brands

GE 27918, User Manual

Search results

Summary of Contents for 27918

Reviews:

Related manuals for 27918

Brands by name

Popular brands