GE Security GE-DS-82, User Manual

Page: 138 / 227

Chapter 4: Web-Based Management
134 GE-DS-82 and 82-PoE Ethernet Managed Switch User Manual
This page includes the following fields:
OBJECT DESCRIPTION
PoE PSU Status PoE PSU Status shows status of power supply for PoE output.
PoE Temperature Unit 1 Displays the current operating temperature of PoE chip unit 1.
The unit 1 is in charge of PoE Port-1-Port-12
PoE Temperature Unit 2 Displays the current operating temperature of PoE chip unit 2.
The unit 1 is in charge of PoE Port-13-Port-24
Over Temperature
Protection Enable / Disable over temperature protection.
When the PoE temperature unit 1 / unit 2 over 70°C then PoE power
budget will be changed by 3 segments as follows.
- Over 70°C power budget 180 Watts
- Over 73°C power budget 170 Watts
- Over 76°C power budget 160 Watts
Power limit mode Allows you to configure the power limit mode of Web Smart Device. You
can choose:
- Port Priority Deliver PoE power by port priority setting
- Total Limit. Set limit value of the total POE port provided power to the
PDs.
Power Allocation Shows the total Watts usage of the PoE Switch.
PoE Function Can enable or disable the PoE function.
Priority Sets the port priority for the POE power management
It can choose the “port priority”, value is :
- Critical
- High
- Low
High priority is “Critical”.
Device class Class 0 is the default for PDs. However, to improve power management
at the PSE, the PD may opt to provide a signature for Class 1 to 3.
The PD is classified based on power. The classification of the PD is the
maximum power that the PD will draw across all input voltages and
operational modes. A PD shall return Class 0 to 3 in accordance with
the maximum power draw as specified by Table 4.1.
Current(mA) It shows the PoE device current Amp.
Consumption [W] It shows the PoE device current watt.