manualshive.com logo in svg

GE Security GE-DS-82, User Manual

The GE Security GE-DS-82 provides top-notch security features for your home or office. Ensure a seamless installation process with our detailed and user-friendly Installation Manual. Download it for free from manualshive.com, empowering you to set up your system effortlessly and efficiently.

Share
Download
background image

Chapter 4: Web-Based Management 

42 

GE-DS-82 and 82-PoE Ethernet Managed Switch User Manual 

Another possibility is getting your address assigned to you automatically over the net 
via DHCP protocol. Enable DHCP function, and reset the machine. If your network is 
set up for this service, you will get an IP address assigned over the network. If you 
don't get an address in about 30 seconds, you probably don't have DHCP.  

IP Configuration 

The IP Configuration includes the IP Address, Subnet Mask and Gateway. The 
Configured column is used to view or change the IP configuration. Fill up the IP 
Address, Subnet Mask and Gateway for the device. The screen in Figure 25 appears. 

Figure 25:  IP configuration interface 

 

This page includes the following fields: 
 

OBJECT DESCRIPTION 

DHCP 

Enable or disable the DHCP client function. 

When DHCP function is enabled, the Managed Switch will be assigned 
an IP address from the network DHCP server. The default IP address will 
be replaced by the assigned IP address on DHCP server. After the user 
clicks Apply, a popup dialog shows up to inform the user that when the 
DHCP client is enabled, the current IP will lose and user should find the 
new IP on the DHCP server. 

Summary of Contents for GE-DS-82




































































































































































































































Reviews:

No comments

Related manuals for GE-DS-82

Paradyne COMSPHERE 3610 User Manual preview
COMSPHERE 3610
Brand: Paradyne Pages: 112
Cambium Networks PMP 450 Series User Manual preview
PMP 450 Series
Brand: Cambium Networks Pages: 215
Oracle Talari E1000 Installation Manual preview
Talari E1000
Brand: Oracle Pages: 24
Conceptronic C150BRS4 Quick Installation Manual preview
C150BRS4
Brand: Conceptronic Pages: 230
National Instruments FieldPoint cFP-RTD-122 Operating Instructions Manual preview
FieldPoint cFP-RTD-122
Brand: National Instruments Pages: 15
Abocom PLS342 Specification Sheet preview
PLS342
Brand: Abocom Pages: 2
Trend Micro IPS Pro-Module-24C-GE-BP-TM Quick Setup Manual preview
IPS Pro-Module-24C-GE-BP-TM
Brand: Trend Micro Pages: 3
ADTRAN NetVanta Serial Dial Backup Interface Module (DIM) none Quick Start Manual preview
NetVanta Serial Dial Backup Interface Module (DIM) none
Brand: ADTRAN Pages: 2
Cabletron Systems CyberSWITCH CSX101 User'S Information Manual preview
CyberSWITCH CSX101
Brand: Cabletron Systems Pages: 72
B+B SmartWorx SPECTRE v3 LTE User Manual preview
SPECTRE v3 LTE
Brand: B+B SmartWorx Pages: 50
Cradlepoint MBR900 Quick Start Manual preview
MBR900
Brand: Cradlepoint Pages: 2
Alcatel-Lucent 1353 Brochure preview
1353
Brand: Alcatel-Lucent Pages: 12
Lindy Modular Fast Fiber Switch Converter MT-RJ Specifications preview
Modular Fast Fiber Switch Converter MT-RJ
Brand: Lindy Pages: 3
I-Tech NW117HD-8Ke User Manual preview
NW117HD-8Ke
Brand: I-Tech Pages: 6
D-Link DSL-125 Quick Installation Manual preview
DSL-125
Brand: D-Link Pages: 12
Digi TransPort WR41 Quick Start Manual preview
TransPort WR41
Brand: Digi Pages: 2
Kraun KN.2R User Manual preview
KN.2R
Brand: Kraun Pages: 88
Tripp Lite N306-006 Specification Sheet preview
N306-006
Brand: Tripp Lite Pages: 2

Brands by name

Popular brands

Load more brands