Chapter 4: Web-Based Management
GE-DS-82 and 82-PoE Ethernet Managed Switch User Manual
99
This page includes the following fields:
OBJECT DESCRIPTION
Group Key
This is a read-only column field that displays the trunk group ID.
Port member
This is a read-only column field that displays the members of this static
trunk group.
LACP enabled
Having set up the aggregator setting with LACP enabled, you will see the trunking
group information between two switches on the tab of
Aggregator Information
.
•
Switch 1 configuration
1. Set
System Priority
of the trunk group. The default is 1.
2. Select a
trunk group ID
by pull down the drop-down menu bar.
3. Enable
LACP
.
4. Include the member ports by clicking the
Add
button after selecting the port
number and the column field of
Work Ports
changes automatically.
Figure 67: Aggregation Information of Switch 1
5. Click on the tab of
Aggregator Information
to check the trunked group
information as the illustration shown above after the two switches configured.
Summary of Contents for GE-DS-82
Page 26: ...Chapter 2 Installation 22 GE DS 82 and 82 PoE Ethernet Managed Switch User Manual ...
Page 149: ...Chapter 5 Console Management 146 GE DS 82 and 82 PoE Ethernet Managed Switch User Manual ...
Page 213: ...Chapter 6 Command Line Interface 210 GE DS 82 and 82 PoE Ethernet Managed Switch User Manual ...
Page 216: ...Chapter 7 Command Line Interface GE DS 82 and 82 PoE Ethernet Managed Switch User Manual 213 ...
