23
Installing the software
The following software is on the CD-ROM:
Easy IP Setup software.
This software is used to make network settings on the camera.
CamPlus 2 IP Viewer software.
To display images on this camera, the viewer software “CamPlus 2 IP
Viewer” must be installed. This software can be installed directly from the camera, or by double clicking
the executable file in the
ViewerSoftware
folder on the CD-ROM. Follow the on-screen instructions.
Using the Easy IP Setup Software to set up the camera
Use the Easy IP Setup Software to configure network settings on the camera.
When two or more cameras are used, network settings must be configured on each camera.
When the network settings cannot be configured using the Easy IP Setup software, set up the cameras and PC
individually in the
Network setup
page of the viewer software.
When Windows XP SP2 is used, an important alert screen regarding security may be displayed when the Easy
IP Setup software is started up. If this happens, click the
Unblock (U)
button.
To enhance security, the Easy IP Setup software turns off the display of the addresses of the target camera 20
minutes after the camera is turned on. Note that this is not true if the network settings (IP address, default
gateway, subnet mask, HTTP port number, DHCP setting, user ID, and password) are left at their default
settings. In this case the MAC address and IP address of the target camera continue to be displayed even after
20 minutes.
Note:
The Easy IP Setup software cannot be used on different subnets via a router.
