CamPlus 2 Vandal Resistant Dome IP Camera
Installation Manual
16
Adjusting the camera
To adjust the camera, do the following:
1. Adjust the camera angle while monitoring the image on the adjustment monitor.
2. Connect the adjustment monitor (small LCD monitor, etc.) to the monitor output terminal, and adjust
the camera angle.
3. Determine and set the camera angle while repeating the fine-adjustments in the following a, b, and c
steps (
Figure 18
).
Figure 18. Pan and tilt controls
a.
Loosen the pan lock screw, and rotate the camera horizontally to adjust pan.
b. Loosen the 2 tilt lock screws, and rotate the camera vertically to adjust tilt.
c.
Turn the tilt adjustment seat to adjust the screen tilt.
d. When the camera angle is determined, tighten the pan lock screw and the tilt lock screws.
Tilt adjustment seat
Panning
table
Pan lock screw
Tilt lock screw
Monitor output connector
(mini-jack)
75°
