CamPlus 2 Vandal Resistant Dome IP Camera
Installation Manual
18
Additional adjustment notes
How to Change the View Angle.
To change the view angle, turn the zoom lock lever and focus lock lever
to adjust the focus.
How to Focus (capturing subjects with a self-closing lens).
When the focus has been adjusted with the
iris closed (to capture a bright subject), the subject may be out-of-focus when the iris is opened. So, try to
focus the lens in as dark conditions as possible.
How to Focus (when capturing subjects in the near infra-red range).
On the
Image/ABF
tab under
Camera setup
, click the Back Focus
SETUP>>
button. The
Back Focus
setup dialog box is displayed.
Focus can be adjusted at both the near infra-red area and the visible light area when adjusting method is set
to
AUTO
or
PRESET
.
How to Use the Varifocal Lens and Zoom Lens.
Before adjustment, reset the back focus position, and
return the CS mount to its default position.
Install the camera enclosure
To install the enclosure, do the following:
1. Install the enclosure. Align the mark on the side of the enclosure with the line on the side of the
bracket.
2. Tighten the screws using the driver bit (provided).
Note:
When installing the enclosure, the camera focus may shift slightly out of position. So, either hold the ABF button down for
at least two seconds before installing the dome cover, or make the final adjustment on the PC after installing the dome cover.
If the ABF button is held down, the installer will have 2 minutes to complete installation of the dome before the camera will run
the ABF function.
