NX-8 Commercial Fire
12
2.
BINARY DATA
The top line of the display will show the current location number on the left and the segment number on the
right. The data will be displayed on the bottom line with the numbers 1-8 in the first 8 characters. If the number
appears, this binary switch is on. If a minus sign (-) appears where the number should be, this switch is off.
Toggle numbers on or off using the corresponding number digit (1 to toggle 1; 8 to toggle 8). When the numbers
are in the desired state, enter
. The data will be entered and the segment will be incremented by 1. The data
for this segment will now be displayed. Continue this process until the last segment is programmed. When the
last segment is reached, the keypad will prompt for the next location. If you wish to exit this location before the
last segment is reached, press #. This keypress will not save the changes made to current segment, but will exit
the location. “Shortcut Keys” shown in Numerical Data can also be used for Binary Data.
3.
CHARACTER DATA
Character Data is used to enter LCD text when programming. (Refer to the NX-148ECF instruction manual for
custom messages
feature.) Custom zone descriptions and messages are stored character or ASCII
data type. This information is programmed using the bottom line of the display as a text editor. Once a character
location has been entered, the current data will be displayed on the bottom line. As is always the case, the top
line will display the current location and segment number. The five (5) function keys, as well as the up and down
arrow to the right of the display, are now used to edit the message prior to saving it back to the location storage.
An underscore (_) in the display indicates the current cursor location.
Shortcut keys:
Saves character or word; moves cursor to right
CANCEL
Moves cursor to left.
or
Scrolls through available characters.
(In Library Mode) Scrolls through available words.
Tip: Refer to the NX-148ECF instructions for more details.
STAY
Inserts blank space.
CHIME
Deletes characters.
EXIT
Accesses the Library
Tip: Refer to the NX-148ECF instructions for more details.
BYPASS
Makes the character “flash”.
(In Library Mode) Makes the entire word “flash”.
#
Exits the edit mode.
EXITING A LOCATION
Action
Result
Saves the data and exits that location.
Tip: The
must be pressed or the data will not be saved.
To exit before the last segment, press #.
You are now ready to program another location.
EXITING THE PROGRAM MODE
Action
Result
EXIT
Exits this program level. Advances to “Select a Module”.
EXIT
Exits the programming mode entirely.
Technical Manuals Online! - http://www.tech-man.com
