System Programming
Digiplex IV User Manual
36
1034169B / December 2003
4)
At the C-7 group-specific menu, monitors already assigned to the group have an asterisk (*) beside
the MON (monitor) number.
Use
#
and
$
to move the on-screen arrow to the monitor/camera to be changed. Use
!
and
"
to
point the on-screen arrow left toward the monitor number or right toward the camera site number.
After pointing the on-screen arrow toward the desired monitor number, press the
clear
key to
remove the monitor from the group or press the
set
key to add the monitor to the group. After
pointing the on-screen arrow toward the desired camera site number, use the number keys to enter
a camera site number for the associated monitor.
Note:
You can assign any camera to any monitor to any group.
C-7 GRP 02 PARKING - LEVEL 2
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
MON SITE DESCRIPTION
*001
!
0003 PAY BOOTH
002 ----
003 ----
*004 0056 PARKING ENTRANCE
005 ----
006 ----
007 ----
ALARM=HELP / SEQ=EXIT
5)
At the C-1 group switching menu, press the
1
key to access the C-2 menu to program the alarm
call-ups for the groups. The alarm call-up assignment enables a group of cameras to be switched
when an alarm occurs.
Use the number keys to enter an alarm number that will call up selected groups.
C-1 GROUP SWITCHING MENU
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
GROUP ALARM CALL-UP -1-
GROUP SEQUENCE ROUTINES -2-
GROUP SETUP -3-
GROUP TITLES -4-
ALARM=HELP / SEQ=EXIT
C-2 GROUP ALARM CALL-UP
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
ENTER ALARM NUMBER: ----
ALARM=HELP / SEQ=EXIT
