Emergency shutdown
In an emergency situation, do as follows to stop the run:
Switch off power to the instrument by switching the On/off switch on the rear panel to
the (O) position. If required, disconnect the mains power cord. The run is interrupted
immediately.
Power failure
In the event of power failure the run is interrupted immediately.
2.4
Procedures for decommissioning
Introduction
This section contains information about the decommissioning of Monitor UV-900.
Decontamination
The product must be decontaminated before decommissioning. All local regulations
must be followed with regard to scrapping of the equipment.
Disposal of the product
When taking the product out of service, the different materials must be separated and
recycled according to national and local environmental regulations.
Recycling of hazardous
substances
Monitor UV-900 contains hazardous substances. Detailed information is available from
your GE representative.
20
Monitor UV-900 Operating Instructions 28962214 AD
2 Safety instructions
2.3 Emergency procedures
