68
MDS™ Master Station
MDS 05-6399A01, Rev. F
•
Port
(TFTP) – The TCP port that the TFTP server is operating on.
•
User Name
(SFTP/FTP) – The user to connect to the SFTP/FTP server as.
•
Password
(SFTP/FTP) – The password for the SFTP/FTP server.
•
Control Port
(SFTP/FTP) – The TCP port that the SFTP/FTP server is operating on.
Default is 22 for SFTP and 21 for FTP.
•
Data Port
(FTP) – The TCP port that the FTP server uses for data connections. Default is
20.
•
Timeout
(All) – Determines the amount of time (in seconds) that the radio should wait for
server to respond. The default setting is 30 seconds and will not normally require any
change.
When the above fields have been set and you are ready to load a new file, click the Begin
Reprogramming button to begin reprogramming. To view the current status of the remote
reprogramming operation, navigate to the sdms interface status page.
Cancel Reprogramming
During the reprogramming operation the user has the ability to cancel reprogramming at any
time either on the Master Station, which will affect all radios, or on individual receiving stations.
Note that cancelling reprogramming at the Master Station results in all radios in the network
having only one (instead of two) applications programmed in their image banks. That is, the
“inactive” image (which was only partially upgraded) will be corrupt and unusable until
reprogrammed at a later time.
Reprogramming Status
Once reprogramming has begun, the current reprogramming status will appear beneath the
“Cancel Reprogramming” button.
