HES7000 ICLI User’s Guide A01583 Rev. A
Page
27
of 37
Add two accounts, ‘operator’ and ‘monitor’. The passwords are supplied in unencrypted form:
myDevice#
configure terminal
myDevice(config)#
username operator privilege 10 password unencrypted a-secret
myDevice(config)#
username monitor privilege 1 password unencrypted new-secret
Verify that the configuration is correct. Note that passwords are always displayed in
encrypted form:
myDevice(config)#
do show running-config | include username
username admin privilege 15 password encrypted dmVyeS1zZWNyZXQ=
username operator privilege 10 password encrypted YS1zZWNyZXQ=
username monitor privilege 1 password encrypted YW5vdGhlci1zZWNyZXQ=
Delete the ‘operator’ user and verify it is removed from the configuration:
myDevice(config)#
no username operator
myDevice(config)# do show running-config | include username
username admin privilege 15 password encrypted dmVyeS1zZWNyZXQ=
username monitor privilege 1 password encrypted YW5vdGhlci1zZWNyZXQ=
Summary of Contents for HES7000
Page 1: ...HES7000 ICLI USER S GUIDE A01583 Rev A ...
Page 3: ...HES7000 ICLI User s Guide A01583 Rev A ...
Page 4: ......
