HES7000 ICLI User’s Guide A01583 Rev. A
Page
5
of 37
All interfaces except GigabitEthernet 1/1 are at default settings, so nothing is displayed for
them. As a general rule of thumb only non-default configuration is displayed, otherwise the
output would be huge and readability would suffer. There are a few exceptions which will be
discussed later.
Following the physical interfaces are VLAN interfaces, 1 and 42. Only the latter has an IP
address assigned. Finally the line section is shown. It specifies characteristics for the serial
console (line console 0) or network ICLI management connections (line vty
x
).
The configuration as displayed above is also what is saved to
startup-config
.
myDevice#
copy running-config startup-config
Building configuration...
% Saving 1326 bytes to flash:startup-config
myDevice#
dir
Directory of flash:
r- 1970-01-01 00:00:00
648 default-config
rw 1970-01-03 18:21:28
1326 startup-config
2 files, 1974 bytes total.
myDevice#
more flash:startup-config
hostname myDevice
username admin privilege 15 password encrypted dmVyeS1zZWNyZXQ=
!
vlan 1
name default [...]
The
command “
dir
”
lists the files in the FLASH file system while
the command “
more
”
outputs the contents of the designated file.
Summary of Contents for HES7000
Page 1: ...HES7000 ICLI USER S GUIDE A01583 Rev A ...
Page 3: ...HES7000 ICLI User s Guide A01583 Rev A ...
Page 4: ......
