HES7000 ICLI User’s Guide A01583 Rev. A
Page
15
of 37
3.6. Understanding Modes and Sub-modes
The ICLI implements a number of
modes
that control the available command set. The modes
are further influenced by the
privilege level
of the user; some modes or commands are only
accessible to administrators while others require no privileges beyond log in.
There are three major modes, Exec, Privileged Exec and Config. Under Config there exist a
number of
sub-modes
. The sub-modes allow configuration of specific VLANs, Ethernet
interfaces, etc.
Table 6.
Modes and Sub-modes
Mode
Parent
Mode
Description
Exec
-
Lowest-privileged mode; used for basic system monitoring.
Generally does not allow modifications to the system.
Command:
disable
Prompt:
hostname
>
Privileged Exec
Exec
Privileged mode; allows configuration and other modifications
to the system.
Command:
enable
Prompt:
hostname
#
Config
Priv. exec
Global configuration mode
Command:
configure terminal
Prompt:
hostname
(config)#
VLAN Config
Config
Sub-mode for configuring active VLANs
Command:
vlan
vlan_id_list
Prompt:
hostname
(config-vlan)#
VLAN Interface
Config
Config
Sub-mode for configuring VLAN interfaces
Command:
interface vlan
vlan_id_list
Prompt:
hostname
(config-if-vlan)#
Interface Config Config
Sub-mode for configuring Ethernet interfaces
Command:
interface
type switch_num
/
port_num
Prompt:
hostname
(config-if)#
Line
Config
Sub-mode for configuring terminal lines
Command:
line
{
con
|
vty
}
line_num
Prompt:
hostname
(config-line)#
IPMC Profile
Config
Config
Sub-mode for configuring IP Multicast profiles
Command:
ipmc profile
profile_name
Prompt:
hostname
(config-ipmc-profile)#
SNMP Server
Host Config
Config
Sub-mode for configuring SNMP server host entries
Command:
snmp-server host
host_name
Prompt:
hostname
(config-snmps-host)#
STP Aggregation
Config
Config
Sub-mode for configuring Spanning Tree Protocol aggregation
Command:
spanning-tree aggregation
Prompt:
hostname
(config-stp-aggr)#
DHCP Pool Config Config
Sub-mode for configuring DHCP client pools
Command:
ip dhcp pool
pool_name
Prompt:
hostname
(config-dhcp-pool)#
RFC2544 Profile
Config
Config
Sub-mode for configuring RFC2544 profiles
Command:
rfc2544 profile
profile_name
Prompt:
hostname
(config-rfc2544-profile)#
Summary of Contents for HES7000
Page 1: ...HES7000 ICLI USER S GUIDE A01583 Rev A ...
Page 3: ...HES7000 ICLI User s Guide A01583 Rev A ...
Page 4: ......
