DU-AG-0018-25 Rev J 4/19/17 GCX Corp Page 4 of 8
Attaching the Down Post to the Arm
The Down Post is used for mounting the Flexible Module Server (FMS). Skip this procedure if your IntelliVue monitoring
system does not require a Down Post or FMS.
1. Align three (3) mounting holes in Lower Post Disc with three (3) threaded holes in Swivel Cup (below left). Using the
5/32'' hex wrench provided, fasten Post to Swivel Cup with three (3) #10-32 x 3/8'' SHCS.
Mounting the Flexible Module Server (FMS) on the Down Post
1. Attach the FMS to the Down Post by placing the Clamp around the Down Post and tightening the knob.
Down Post
FMS
Clamp
#10-32 x 3/8'' SHCS (3)
Swivel Cup
Lower Post Disc
6'' Down Post