DU-WS-0004-59 Rev A 6/15/11 GCX Corp. Page 5 of 9
Attaching Di splay Mount to Di splay
1. Align the (4) mounting holes on the Display Mount wit h the (4) threaded mounting holes on the display.
2. Using a Phillips screwdriver, secure display mount to display with (4) M4 x 10mm Pan Head Machine Screws (P HMS).
Attaching Di splay Mount to Folding L-Bracket
1. Install Display Mount to Folding L-Bracket as shown below. The (4) upper and lower nylon washers should be
positioned against the Folding L-Bracket. The (4) upper and lower metal Flat Washers should be positioned against the
Display Mount, Adjustment Knob, and the 5/16” Locknut.
2. Using a 1/2” Socket Wrench (supplied), tighten the 5/16” Locknut until Display Mount moves up and down wit h
resistance. Tighten Adjustment Knob until Display Mount does not move. Press protective cover onto the 5/16” locknut.
Adjustment Knob
(4) M4 x 10mm PHMS
Display Mount
5/16” Locknut
1/2"-13mm Socket Wrench
(supplied)
Nylon Washer
Flat Washer
Display Mount
Nylon Washer
Flat Washer
Display
Protective Cap
