DU-WS-0004-59 Rev A 6/15/11 GCX Corp. Page 4 of 9
Attaching Folding L-Bracket to VHM Arm
1.
Using a 5/32” Hex Wrench, attach folding L- Bracket to VHM arm with (2) 1/4-28 FHS CS.
Attaching Keyboard Tray (not supplied) to Folding L-Bracket
1.
Install Keyboard Tray in accordance with separate Installation Guide supplied with Key board tray.
Folding L-Bracket
VHM Arm
5/32 Hex Wrench
(2) 1/4-28 x 3/4" FHSCS
CAUTION: Do not place fingers in-bet ween Folding Keyboard Bracket Mounting Block and
Mounting Plate surfaces. There is risk of pinching or crushing fingers, especially while
installing keyboard tray and adjusting folding tension.
Mounting Plate
Mounting Block
Folding Keyboard Bracket
