8000-422B/W WALL MOUNT for GENELEC 6010A, 8020B, 8030A
black/white
Instruction Manual
1. Equipment
2. Separate speaker
2.
holder from wall plate
4. Wall mount fastening
2.b
Remove
speaker holder
from wall plate
4.a.1 Two-hole-pattern
4.a.2 Three-hole-pattern
2.a
Loosen
lower bolted
assembly
4.a
Adjust decorative plate according to the drilled two-or-three-hole-pattern
4.b
Bolt down the wall plate along with the decorative plate
onto the wall
Use two or three screws depending on the prepared hole pattern
speaker holder
with wall plate
decorative
plate
3.b.1 Two-hole-pattern
3.b.2 Three-hole-pattern
3.c Anchor holes drilling
3.c
for two or three hole
3.c
pattern: - dia. 8 mm
3.d Blow out holes and
3.d
place anchors
3.a Determine wall fastening
3.a.1 Provided screw/dowel set is suitable for:
concrete, full brick, perforated brick & drywall
3.a.2 For other walls like wood, adobe etc. use adequate anchors
3.b Adjust wall plate vertically and mark drilling holes (two options):
3. Wall mount preparation
