background image

DU-WS-0004-59 Rev A 6/15/11 GCX Corp. Page 1 of 9 

 

 

           3875 Cypress Drive  Petaluma, CA 94954  800.228.2555  707.773.1100 Fax 707.773.1180  www .gcx.com

 

 

Installation & Operation Manual 

VHM

™ 

Series Arms with Fixed Angle Front End 

WS-0004-59 (40 lb/18.1 kg Max. Weight)  & WS-0004-61 (30 lb/13.6 kg Max. Weight) 

in Combination with Folding “L” Flat Panel/Keyboard Bracket FLP-0008-41

 

 

 
 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The purpose of thi s guide i s to:  

 

Describe parts contained within this k it (page 2).  

 

Describe installing Adjustable Stop (page 3). 

 

Describe installing VHM A rm (page 3).  

 

Describe attaching Folding L-Brack et and Keyboard Tray (page 4).  

 

Describe attaching Display Mount to Display (page 5).  

 

Describe attaching Display Mount to L-Brack et (page 5). 

 

Describe Mouse House installation (page 6). 

 

Describe Cautions, Warnings, Adjustments, and Cleaning (page 6-10).  

 

 

 

Tool s Required: 

 

Phillips Screwdriver (not provided).  

 

Hex Wrenches – 3mm, 1/8”, 5/32” (provided).  

 

1/2" Socket Wrench (provided).  

 

3/4" Socket Wrench (not provided).  

 

Summary of Contents for VHM Series










Reviews: