GCC Technologies LaserPro S400, User Manual

Page: 131 / 198

129 232003110G (03)
• Center: Sets the current position of the laser head as the center point for your subsequent job. As
an example, if the subsequent job is to vector cut a circle and you have the Position Mode set to
Center, then the S400 will vector cut a circle around the initial position of the laser head.
• SmartCENTER: The SmartCENTER function is a quick and easy way to precisely locate the
center point between two points or four points.
Tip
The SmartCENTER function is a quick and easy way to precisely locate the
center point between two points or four points. It is a great tool for users
whose jobs often require engraving on specific locations such as on awa rd
signs and plaques.
Tip
It is highly recommended you enable the red dot laser pointer when setting /
adjusting the Position Modes, as this will ease your job positioning with
enhanced accuracy.
Image Output Direction (Advanced Page) [DEFAULT SETTING: Top to Bottom]
These selections allow you to control the direction in which the system processes an engraved
image.