GCC Technologies LaserPro S400, User Manual

Page: 107 / 198

105 232003110G (03)
Machine Setting- Set Standby Mode Page
The Set Standby Mode page allows you to configure the laser machine automatically enter into
power saving if machine is idle for a specified time.
When entering into the Set Standby Mode function, you can use Left or Right arrow keys to scroll
between <Enable> or <Disable> the function. The Time function is to determine after how long
the laser machine is idle, it will enter in power saving automatically. The default time is 4 minutes.
The Enter Standby function will turn the machine into power saving immediately after selected.
•
Standby: Enable/ Disable
•
Time: 4-30 mins. (Default 4 mins.)
•
Enter Standby: YES/ NO
Set Standby Mode Page
Relevant Buttons Function
Back Back to previous page
Save Save your current settings
Navigating to this page:
Main Work Page
Functions Page
Machine Setting Page
Set Standby Mode Page