24
ULTRATHERM 908i
gbo Medizintechnik AG 2004
Version 1.6
7
Summary of operations
See subparagraph
•
Connect the therapy unit to the mains socket outlet
3.1
•
Connect the applicator(s) to the therapy unit
3.5
•
Attach the applicator(s) to the patient
4
•
Turn on the therapy unit with switch
(1 )
3.2
•
Select the mode of operation, buttons
(3), (4), (5)
3.3
•
Select the applicator(s), buttons
(6)
to
(11
)
3.4
•
Set the treatment time, buttons
(12), (13)
3.6
•
Set the dosage knob
(17)
3.7
•
Electric power is applied to the output, the treatment timer starts operation.
•
After the chosen treatment time has elapsed the therapy unit automatically turns off, on the
display an
E
(ND) is shown and the unit emits an intermittent acoustic signal for about 10 s.
This signal is repeated every minute until the dosage knob
(17)
is reset by turning to the left
(counterclockwise).
•
When an error is displayed (except for
FE 0
) press
RESET
button
(2)
and readjust, if
required.
•
The entire therapy unit is switched off by actuating switch
(1)
again.
