PC200
13 - ONBOARD RADIO RECEIVER CONTROL
Storing a new transmitter in memory:
1- Press and hold down the
RF-learn
button for 3 seconds.
2- LED 5 will come on.
3- Press button 1 of the radio control to be stored for 2 seconds.
4- LED 5 will flash 3 times and the new radio control is stored.
5- LED 5 will stay on for another 10 seconds; during this period, you can store other transmitters, restarting from
step 3.
Clearing the memory:
1- Press and hold down the
RF-learn
button for 10 seconds.
2- LED 5 will initially come on and then go off after 10 seconds.
3- All the transmitters have now been deleted.
Assigning START and PED commands to the transmitter buttons:
Refer to
Figure 12.
GATE CLOSED
GATE OPEN
DURING CLOSING
DURING OPENING
GATE STATUS
EFFECT
N.C. FRAME
-
-
RELOADS THE PAUSE TIME
STOPS, INVERTS THE MOTION FOR 2 SECONDS,
STOPS UNTIL RELEASE, THEN OPENS
GATE CLOSED
GATE OPEN
DURING CLOSING
DURING OPENING
GATE STATUS
EFFECT
OPENING DEVICE
-
RELOADS THE PAUSE TIME
OPENS
12 - TERMINALS 20 and 23 OPERATING MODE
STOPS, INVERTS THE MOTION FOR 2 SECONDS,
STOPS UNTIL RELEASE, THEN CLOSES
OPENS
UK
17
