GBD KUDA 150, Instructions For Installations

Page: 31 / 36

PC200
8 - DIP SWITCH SW1
ON
STEP-BY-STEP
WITH STOP
OFF CONDOMINIUM
Operation in response to the START command:
Ÿ Gate closed OPENS
Ÿ
During opening STOPS
→
Ÿ Gate open CLOSES
→
Ÿ
During closing STOPS
→
Ÿ After a STOP inverts the motion
→
→
Operation in response to the START command:
Ÿ Gate closed OPENS
Ÿ
During opening UNINFLUENTIAL
→
Ÿ Gate open Reloads the automatic closing time if automatic closing
→
is enabled, otherwise it closes.
→
Description DIP Status Function
DIP 7
DIP 8
Enables pre-flashing of 3 seconds before motor activation during opening and closing.
Disables pre-flashing.
ON
OFF
PRE-FLASHING
10 - DIP SWITCH SW2
The settings are stored during the rest phase (gate closed).
The default settings are highlighted in the boxes with grey background.
Description DIP Status Function
Terminal 20 functions as PHOTOCELL 1 input.
Terminal 23 functions as PHOTOCELL 2 input.
DIP 1
DIP 2
OFF
OFF
TERMINALS 20 and 23
PROGRAMMING
Terminal 20 functions as PHOTOCELL 1 input.
Terminal 23 functions as N.C. FRAME input.
ON
OFF
Terminal 20 functions as PHOTOCELL 1 input.
Terminal 23 functions as OPEN input.
OFF
ON
Terminal 20 functions as N.C. FRAME input.
Terminal 23 functions as PHOTOCELL 1 input.
ON
ON
DIP 3
DIP 4
OFF
OFF
GATE PHASE
SHIFT TIME
Motor 2 delay during opening: 2 seconds.
Motor 1 delay during closing: 3 seconds.
ON
OFF
Motor 2 delay during opening: 2 seconds.
Motor 1 delay during closing: 5 seconds.
OFF
ON
Motor 2 delay during opening: 3 seconds.
Motor 1 delay during closing: 4 seconds.
ON
ON Motor 2 delay during opening: 3 seconds.
Motor 1 delay during closing: 6 seconds.
UK
15