![background image](http://html1.mh-extra.com/html/gbc/pro-tech-nord-orca-i-sp/pro-tech-nord-orca-i-sp_operation-manual_571034057.webp)
ORCA-I SP Operation Manual
Specifications
© GBC Pro-Tech 1998 April
6-1
6HFWLRQ 6SHFLILFDWLRQV
Table 6-1: ORCA-I SP Laminator Specifications
Characteristic
Specifications
Dimensions
(L x D x H)
75" x 37" x 56"
(1.91 x .94 x 1.42 m)
Weight
Uncrated: 1425 lbs (646 kg)
Crated: 1775 lbs (805 kg)
Laminating Rolls
61" (155 cm) roll face with high
release surface, upper and lower
rolls internally heated
Laminating
Opening
1.5" (3.8 cm) maximum opening
Laminating Mate-
rial
Uses heat activated and pressure-
sensitive materials
0 - 55" (0 - 140 cm) wide on a
3" (7.6 cm) ID core, 10"
(25.4 cm) maximum diameter
Laminating
Speeds
0 to 14 fmp (0 to 4.3 mpm) with
variable speed, reversible action,
start and stop controlled either
through the instrument panel or
with the footswitch
Encapsulating
Features
Pull rolls and cooling fans for
uniform flat cooling
Safety Features
•
Photoelectric eyes prevent
laminating roll movement if
objects are in the nip area
•
All electrical and moving
mechanical parts are located
in bolted cabinets
•
2 emergency stop buttons
•
2 emergency kick cables
Standard Features
Outfeed Slitters
Options
Outfeed Table
Installation
Requirements
USA: 220-240 VAC, 50/60 Hz,
55A, single phase 3 wire.
Europe: 230/400 VAC, 3-N
phase, 50 Hz, 25A per phase.
Max. Air Pressure: 120 psi
(825 kPa).
Min. Air Pressure: 2 cfm at 100
psi (0.5 m
3
at 700 kPa). Warning:
if air supply exceeds 100 psi and
is less than 120 psi, the pressure
booster must be adjusted.
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500