![background image](http://html1.mh-extra.com/html/gbc/pro-tech-nord-orca-i-sp/pro-tech-nord-orca-i-sp_operation-manual_571034030.webp)
Operation
ORCA-I SP Operation Manual
3-14
© GBC Pro-Tech 1998 April
352&(66&21752/&+$57
One Pass Mounting/Laminating
Product: _____________
Process: 1-Pass Mounting/Laminating __________
Date:__________
Material Top:3 Mil Gloss _______________
Material Bottom:3/16 Inch Orca Board _____________
Other Material: ______________________________________________________________________
Special Instructions:___________________________________________________________________________
___________________________________________________________________________________________
___________________________________________________________________________________________
___________________________________________________________________________________________
CONTROL SETTINGS
Speed: 3 ft/min (1 m/min)
Reverse/Forward: Forward
Main Roll Up/Down: Down
Main Roll Pressure: 40 psi (275 kPa)
Top Heater On/Off: On
Top Temp. Set: 220 °F (104 °C)
Bottom Heater On/Off: On
Bottom Temp. Set: 32 °F (0 °C)
Main Roll Shim Dials: Set to board thickness
Pull Roll Clutch On/Off: --
Pull Roll Clutch Pressure: --
Pull Roll Up/Down: Up
Pull Roll Pressure: --
Pull Roll Shim Dials: --
Cooling: --
See Diagram 3-2A for Webbing Outline
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500