4. Installation
Service
WARNING:
Do not attempt to service
or repair the punch. Failure to observe this
warning could result in severe personal injury
or death.
Disconnect the plug from the socket outlet
and contact GBC Technical Service when one or
more of the following has occurred.
•
The power supply cord or attachment plug is
damaged.
•
Liquid has been spilled into the punch.
•
The punch is malfunctioning after being
mishandled.
•
The punch does not operate as described in
these instructions.
Installation
•
Shipping damage should be brought to the
immediate attention of the delivering carrier.
•
Due to the weight of the punch, two people are
required for lifting the machine when
unpacking or relocating.
•
Place the punch on a stable flat surface capable
of supporting 150 lbs.
•
The surface should be at least 30” high to
assure comfortable positioning during
operation. All four rubber feet should be on the
supporting surface.
•
Connect power cord to an appropriate power
source. Avoid connecting other equipment to
the same branch circuit to which the paper
punch is connected as this may cause nuisance
tripping of the circuit breaker or blown fuses.
•
Plug the Foot Pedal air hose to the foot pedal
connector on the back of the machine.
Caring for Magnapunch Pro
The only maintenance required by the operator
is to empty the Chip Tray bin to ensure the
paper chips do not back up into the punch and
periodically clean the surfaces with a lint-free
cloth and a mild detergent. Empty the drawer
frequently to prevent the buildup of paper
chads. Recommended every 200 to 400 cycles
depending on binding style.
